Air Diffusers (Fine Pore) Sweetwater

Air Diffusers (Fine Pore) Sweetwater

  • $3.87


Sweetwater brand fine-pore diffusers are the same high-quality diffusers as the regular Sweetwater diffusers. The only differences in the smaller pore size which produce finer bubbles. Sweetwater fine-pore diffusers do require higher pressure (about 5″ H2O more) and more frequent cleaning so they are not recommended for regular aeration. The bubble uniformity is excellent.

Body: 2000F Heat Bonded Silica
Fitting: ABS or Linear Polyethylene
Maximum Pore Size: 80 microns
Bubble Size: 0.5-2 mm
Nominal Particle Retention: 25 microns
Service Life at pH Below 8.0:   Unlimited
Flexural Strength: 3500 psi

 

Code Length
(Inches)
Width
(Inches)
Suggested
CFM
Air Supply
Connection
Actual
Weight
AS10 1.5″ 0.5″ .05 3/16″ OD, ABS 0.3 lbs
AS20 1.5″ 0.75″ .10 3/16″ OD, ABS 0.6 lbs
AS3F 2.0″ 1.0″ .20 3/16″ OD, PE 0.10 lbs
AS40 1.5″ 1.5″ .25 3/16″ OD, PE 0.21 lbs
AS80 3.0″ 1.5″ .35 1/4″ OD, PE 0.39 lbs
AS150 6.0″ 1.5″ .50 1/4″ OD, PE 0.75 lbs
AS230 9.0″ 1.5″ .75 1/4″ OD, PE 1.35 lbs
ALR230CP 9.0″ 1.5″ .75 1/4″ OD, CPVC 1.35 lbs
AS300 12.0″ 1.5″ 1.00 1/4″ OD, CPVC 1.50 lbs
ALR300CP 12.0″ 1.5″ 1.00 1/2″ NPT, PE 1.50 lbs